mXion VKW 4-Way Point Decoder

The VKW is a very powerful 4-channel turnout decoder (8-channel switching decoder) with 8 protected contact inputs. It can handle a total load of up to 8A, with each output capable of 1A. Its 8 contact inputs (2 per turnout output) allow for various switching tasks, analog control panels, or even direction-dependent switching using switches, pushbuttons, reed switches, or track contacts.

A special feature: turnout routes! These can be stored directly in the decoder (up to 3 times)! This allows control units without a turnout route option or with insufficient storable routes to easily utilize the turnout route function.
And all this is achieved with just one click of a standard turnout address.

In turnout mode (default setting, CV29 Bit7 = 1), it can control 4 turnouts!
In locomotive mode (CV29 Bit7 = 0), it has 8 function outputs available!

This allows for the complete control of even large station or freight areas.

Furthermore, additional combination options are available (special mode for 3-way turnouts, uncoupling tracks, time or continuous mode, automatic reset, etc.). The outputs are dimmable and can be used, for example, for signal lanterns. The module supports CV, POM, and register programming. The VKW should be housed in a protected location (e.g., a model shed).


Functions at a glance:

- 10239 locomotive addresses
- F0 - F28
- 2048 turnout addresses
- Outputs can be addressed independently
- Up to 3 turnout routes can be stored directly in the module
- 8 protected contact inputs
- 4 turnout outputs or 8 function outputs can be used
- Uncoupling mode for uncoupling tracks
- Turnout lantern can be switched next to the turnout
- Starting position adjustable
- 3-pole turnouts can also be switched (H0 and smaller gauges), NOT 3-pole LGB turnouts!
- Motorized turnouts
- 3-way turnout mode
- Dimmable outputs
- Controllable, CV read/write possible with any DCC command station
- 60x66 mm